Engine
Gross Power - SAE J1995 74 hp 55.2 kW
Bore 4.3 in 110 mm
Displacement 171 in² 2.8 l
Net Power - ISO 9249 73 hp 54.4 kW
Net Power - SAE 1349 74 hp 54.9 kW
Peak Torque at 1,360 rpm SAE J1995 280 lb/ft 380 N·m
Engine Model Cat® C2.8TA (turbo after-cooled)
Stroke 3.5 in 90 mm
Hydraulic System
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) 60.9 hp 45.4 kW
Hydraulic Flow - High Flow - Loader Hydraulic Flow 30 gal/min 113 l/min
Hydraulic Flow - High Flow - Loader Hydraulic Pressure 3500 psi 24130 kPa
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) 80.7 hp 60.2 kW
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow 34 gal/min 129 l/min
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure 4061 psi 28000 kPa
Hydraulic Flow - Standard - Hydraulic Power (Calculated) 46.4 hp 34.6 kW
Hydraulic Flow - Standard - Loader Hydraulic Flow 23 gal/min 86 l/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure 3500 psi 24130 kPa
Weights*
Operating Weight 10492 lb 4759 kg
Counterweight Adds to Operating Weight 276 lb 125 kg
Counterweight Adds to Operating Weight - ROC (35%) 173 lb 78 kg
Counterweight Adds to Operating Weight - Tip Load 494 lb 224 kg
Enclosed Cab Adds to Operating Weight 180 lb 82 kg
Enclosed Cab Adds to Operating Weight - ROC (35%) 75 lb 34 kg
Enclosed Cab Adds to Operating Weight - Tip Load 214 lb 97 kg
Note *Operating Weight, Operating Specifications, and Dimensions are based on 2036 mm (80") low profile bucket with bolt on cutting edge, 450 mm (17.7") wide track, 75 kg (165 lb) operator, open canopy, mechanical suspension seat, HD battery with disconnect, standard flow hydraulics, manual coupler, and full fluids. No external counterweights, and no dual self-level/return-to-dig/work tool positioner
Operating Weight - ROC (35%) 2823 lb 1280 kg
Operating Weight - ROC (50%) 4033 lb 1829 kg
Operating Weight - Tip Load 8066 lb 3659 kg
Service Refill Capacities
Cooling System 2.8 gal (US) 10.7 l
Engine Crankcase 2.2 gal (US) 8.2 l
Fuel Tank 31.7 gal (US) 120 l
Hydraulic System 9.7 gal (US) 36.8 l
Hydraulic Tank 6.9 gal (US) 26 l
Operating Specifications
Rated Operating Capacities - 35% Tipping Load 2823 lb 1280 kg
Breakout Force - Lift Cylinder 6739 lb 3057 kg
Breakout Force - Tilt Cylinder 8680 lb 3937 kg
Ground Contact Area - With 450 mm/17.7 in Track 2268 in² 1.46 m²
Ground Pressure - With 450 mm/17.7 in Track 4.6 psi 31.9 kPa
Rated Operating Capacities - 50% Tipping Load 4033 lb 1829 kg
Rated Operating Capacity with Optional Counterweight 2996 lb 1359 kg
Tipping Load 8066 lb 3659 kg
Dimensions
Bucket Pin Height - Carry Position 8.4 in 213 mm
Bucket Pin Height - Maximum Lift 132 in 3354 mm
Bucket Pin Reach - Maximum Lift 9.8 in 249 mm
Clearance at Maximum Lift and Dump 104.5 in 2655 mm
Departure Angle 28.2°
Ground Clearance 8.5 in 216 mm
Height - Top of Cab 83.3 in 2115 mm
Length - Track on Ground 64 in 1626 mm
Length - With Bucket on Ground 140.9 in 3580 mm
Length - Without Bucket 116.1 in 2950 mm
Maximum Overall Height 164.3 in 4173 mm
Maximum Reach - With Arms Parallel to Ground 46.7 in 1187 mm
Overall Length - Track 83.7 in 2126 mm
Rack Back Angle - Maximum Height 85.3°
Reach at Maximum Lift/Dump 25.1 in 638 mm
Roll Back Angle 27°
Turning Radius from Center - Bucket (racked) 87.8 in 2229 mm
Turning Radius from Center - Coupler 56.5 in 1436 mm
Turning Radius from Center - Machine Rear 68.5 in 1741 mm
Vehicle Width (450 mm/17.7 in tracks) 75.8 in 1925 mm
Maximum Dump Angle 46.4°
Cab
FOPS ISO 3449:2005 Level I
ROPS ISO 3471:2008
Power Train
Travel Speed - Forward or Reverse - One Speed 5 mile/h 8 km/h
Travel Speed - Forward or Reverse - Two Speed 8.1 mile/h 13 km/h