Name: 262D3 Skid Steer Loader
Brand: Caterpillar

Imperial
Metric

Engine

Gross Power - SAE J1995:2014 74.3 hp 55.4 kW

Net Power - SAE 1349 72.9 hp 54.4 kW

Displacement 203 in³ 3.3 l

Stroke 4.7 in 120 mm

Bore 3.7 in 94 mm

Peak Torque - 1,500 rpm - SAE J1995 195 ft·lbf 265 N·m

Net Power - ISO 9249 73.7 hp 54.9 kW

Engine Model Cat C3.3B DIT (turbo)

Net Flywheel Power 72.9 hp 54.4 kW

Operating Specifications

Rated Operating Capacity 2700 lb 1225 kg

Rated Operating Capacity with Optional Counterweight 3055 lb 1390 kg

Tipping Load 5400 lb 2455 kg

Breakout Force - Tilt Cylinder 7355 lb 3336 kg

Note Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).

Weights

Operating Weight 8296 lb 3763 kg

Dimensions

Wheel Base 49.2 in 1249 mm

Length - With Bucket on Ground 146.2 in 3714 mm

Length - Without Bucket 117.9 in 2995 mm

Height - Top of Cab 83.1 in 2110 mm

Vehicle Width over Tires 66 in 1676 mm

Maximum Overall Height 157.8 in 4008 mm

Bucket Pin Height - Maximum Lift 124.9 in 3172 mm

Bucket Pin Height - Carry Position 7.9 in 200 mm

Reach - Maximum Lift/Dump 30.9 in 786 mm

Clearance at Maximum Lift and Dump 93.7 in 2380 mm

Ground Clearance 8.9 in 226 mm

Departure Angle 26°

Bumper Overhang - Rear Axle 42.6 in 1083 mm

Maximum Dump Angle 51°

Rack Back Angle - Maximum Height 84°

Bucket Pin Reach - Maximum Lift 15.5 in 393 mm

Turning Radius from Center - Bucket 85.9 in 2181 mm

Turning Radius from Center - Coupler 55.2 in 1401 mm

Maximum Reach - With Arms Parallel to Ground 50.9 in 1293 mm

Turning Radius from Center - Machine Rear 71.1 in 1805 mm

Hydraulic System

Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure 4061 psi 28000 kPa

Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated) 76 hp 57 kW

Hydraulic Flow - Standard - Hydraulic Power (Calculated) 44 hp 33 kW

Hydraulic Flow - Standard - Loader Hydraulic Pressure 3335 psi 23000 kPa

Hydraulic Flow - Standard - Loader Hydraulic Flow 23 gal/min 86 l/min

Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow 32 gal/min 121 l/min

Cab

ROPS ISO 3471:2008

FOPS ISO 3449:2005 Level I

Power Train

Travel Speed - Forward or Reverse - Two Speed Option 11 mile/h 17.7 km/h

Travel Speed - Forward or Reverse - One Speed 7.7 mile/h 12.5 km/h

Service Refill Capacities

Chain Box - Each Side 3.3 gal (US) 12.7 l

Cooling System 3.7 gal (US) 14 l

Engine Crankcase 3 gal (US) 11 l

Fuel Tank 27.7 gal (US) 105 l

Hydraulic System 13.7 gal (US) 52 l

Hydraulic Tank 10.3 gal (US) 39 l

Noise Level

Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Inside Cab* 81 dB(A) 81 dB(A)

Note (2) *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Outside Cab** 101 dB(A) 101 dB(A)

Note (3) **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Air Conditioning System (if equipped)

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.

Resources for 262D3

Quiet and Comfortable

The industry leading sealed and pressurized cab option provides the operator with a cleaner and quieter operating environment with excellent work tool visibility. Continuing the industry leading trend, the D3 Series also includes as standard, seat mounted adjustable joystick controls for operator comfort.

Maximum Performance

High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability.

Making Your Job Easier

Cat® “Intelligent Leveling” system provides industry leading technology, integration, and available features such as dual direction self level, work tool return to dig, and work tool positioner.

Optimized Machine Capability

Maximize machine capability and control with the available Advanced Display, providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.

A Smooth Ride

A standard, Speed Sensitive Ride Control system improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort. (Photo shown may vary from machine referenced.)

Sustainability

The Cat® C3.3B engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 7% biodiesel FAME (fatty acid methyl ester). Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Cat® Extended Life Coolant and long-life HYDO Advanced hydraulic fluids not only reduce downtime but help decrease the amount of fluid and filters that are replaced over the life of the machine.
Boost productivity with Cat technologies like work tool positioner, return to dig, and Cat Smart Attachments.
Save fuel and reduce your greenhouse gas emissions with efficiency features such as foot throttle pedal and cooling system demand fan.

262D3 Standard Equipment

ELECTRICAL

12 volt Electrical System

80 ampere Alternator

Ignition Key Start/Stop Switch

Lights: Gauge Backlighting, Two Rear Tail Lights, Two Rear Halogen Working Lights, Two Adjustable Front Halogen Lights, Dome Light

Backup Alarm

Heavy Duty Battery, 850 CCA

OPERATOR ENVIRONMENT

Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen; Advanced Multi-operator Security System; On-screen Adjustments for Implement Response, Hystat Response and Creep Control

Gauges: Fuel Level, Hour Meter

Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged, Engine Emission System

Adjustable Vinyl Seat

Fold In Ergonomic Contoured Armrest

Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages

ROPS Cab, Open, Tilt Up

FOPS, Level I

Top and Rear Windows

Floor Mat

Interior Rearview Mirror

12 volt Electric Socket

Horn

Hand (Dial) Throttle, Electronic

Adjustable Joystick Controls

Anti-theft Security System with 6-button Keypad

Storage Compartment with Netting

POWER TRAIN

Cat C3.3B, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V Emission Standards

Air Cleaner, Dual Element, Radial Seal

S·O·SSM Sampling Valve, Hydraulic Oil

Filters, Cartridge-type, Hydraulic

Filters, Canister-type, Fuel and Water Separator

Radiator/Hydraulic Oil Cooler (side-by-side)

Spring Applied, Hydraulically Released Parking Brakes

Hydrostatic Transmission

Four Wheel Chain Drive

OTHER

Engine Enclosure, Lockable

Extended Life Antifreeze, –37° C (–34° F)

Machine Tie Down Points (6)

Support, Lift Arm

Hydraulic Oil Level Sight Gauge

Radiator Coolant Level Sight Gauge

Radiator, Expansion Bottle

Cat ToughGuard™ Hose

Auxiliary, Hydraulics, Continuous Flow

Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release

Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm

Electrical Outlet, Beacon

Belly Pan Cleanout

Variable Speed Demand Fan

Product Link™ PL240, Cellular

MANDATORY EQUIPMENT

Hydraulics, Standard or High Flow XPS

Quick Coupler, Mechanical or Powered

High Visibility Seat Belt, 50 mm (2 in) or 75 mm (3 in)

Power Train: One Speed, One Speed with Ride Control, Two Speed or Two Speed with Ride Control

PERFORMANCE PACKAGES:
– Performance Package H1: Standard Flow Hydraulics (No Self Level)
– Performance Package H2: Standard Flow, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
– Performance Package H3: High Flow XPS, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)

COMFORT PACKAGES:
– Open ROPS (C0): Static Seat (No Foot Throttle, Headliner, Heater or Door)
– Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) (No Heater or Door)
– Enclosed ROPS with Heater (C2): Foot Throttle, Headliner, Heater and Defroster, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate)
– Enclosed ROPS with A/C (C3): C2 + Air Conditioner

262D3 Optional Equipment

OPTIONAL EQUIPMENT

Hand-Foot Style Controls

External Counterweights

Beacon, Rotating

Engine Block Heater – 120V

Oil, Hydraulic, Cold Operation

Paint, Custom

Heavy Duty Battery, 1,000 CCA

Product Link PL641, Cellular

Bluetooth® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)

thank you for sharing your thoughts!

Affordability Calculator

Summary

262D3 Skid Steer Loaders

GET A QUOTE

Inquire Now

Thank You!

Oops!