Name: Cat 908 Compact Wheel Loader
Brand: Cat

Imperial
Metric

Engine

Maximum Gross Power 74.7 hp 55.7 kW

Engine Model Cat C2.8*

Maximum Engine Speed 2550 rpm

Maximum Gross Power - Rated Engine Speed 2400 r/min 2400 r/min

Maximum Gross Power - SAE J1995 74.7 hp 55.7 kW

Maximum Gross Power - ISO 14396 74.3 hp 55.4 kW

Maximum Gross Power - ISO 14396 (metric) 75.3 mhp 75.3 mhp

Rated Net Power - Rated Engine Speed 2400 r/min 2400 r/min

Rated Net Power - SAE J1349 72.7 hp 54.2 kW

Rated Net Power - ISO 9249 72.1 hp 53.8 kW

Rated Net Power - 2,400 rpm - ISO 9249 (metric) 73.1 mhp 73.1 mhp

Maximum Gross Torque - SAE J1995 222 lb/ft 300 N·m

Maximum Gross Torque - ISO 14396 221 lb/ft 300 N·m

Maximum Net Torque - SAE J1349 218 lb/ft 296 N·m

Maximum Net Torque - ISO 9249 217 lb/ft 295 N·m

Displacement 171 in³ 2.8 l

Bore 3.54 in 90 mm

Stroke 4.33 in 110 mm

Note Advertised power is tested per the specified standard in effect at the time of manufacture

Note (1) Net power advertised is the power available at the flywheel.

Note (2) *Two Cat C2.8 engine emission options are available: 1) Meets U.S. EPA Tier 4 Final, EU Stage V. 2) U.S. EPA Tier 3 and EU Stage IIIA equivalent. Tier 3 engine specs are 0.3 kW/0.4 hp more gross power (SAE J1995), 0.2 kW/0.3 hp on net power (SAE J1349) and 1 N·m/0.7 lb-ft higher on gross torque (SAE J1995).

Note (3) #Maximum gross and net torque measured at 1,600 rpm.

Weights

Operating Weight 14617 lb 6632 kg

Buckets

Bucket Capacities 0.75-1.55 m³ (1.0-2.0 yd³)

Bucket Capacities - General Purpose 0.80-1.35 m³ (1.0-1.7 yd³)

Multi-Purpose 0.75-1.1 m³ (1.0-1.4 yd³)

Bucket Capacities - Light Material 1.25-1.55 m³ (1.6-2.0 yd³)

Note Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.

Note (1) Bucket capacities stated include BOCE, in line with ISO 7546.

Service Refill Capacities

Fuel Tank 24 Gal 90 l

Cooling System 3.2 Gal 12 l

Engine Crankcase 2.3 Gal 8.8 l

Axles - Front Center Differential 2.3 Gal 8.8 l

Axles - Rear Center Differential 2.3 Gal 8.8 l

Hydraulic System - Including Tank 18.6 Gal 70.5 l

Hydraulic Tank 11.8 Gal 44.6 l

Transmission 0.6 Gal 2.4 l

Note No Diesel Exhaust Fluid (DEF) fluid needed on this size engine.

Axles

Front Fixed (standard), Locking Differential (optional)

Rear Fixed (standard), Locking Differential (optional)

Note Oscillation of ±11 degrees via hitch between front and rear frames.

Steering

Steering Articulation Angle - Each Direction 39 ° 39 °

Maximum Flow - Steering Pump 12.3 gal/min 46.7 l/min

Maximum Working Pressure - Steering Pump 3336 psi 23000 kPa

Steering Cycle Times – (full left to full right) – at High Idle 2.8 s 2.8 s

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.25 turns or 4.00 turns

Transmission

Forward and Reverse - Speed Range Creep# 6 mile/h 10 km/h

Forward and Reverse - Speed Range 1* 6 mile/h 10 km/h

Forward and Reverse - Speed Range 2** - High Speed 10.5 mile/h 17 km/h

Forward and Reverse - Speed Range 2** - Standard 12 mile/h 20 km/h

Forward and Reverse - Speed Range 3*** 25 mile/h 40 km/h

Note #Factory default shown, can be adjusted to any speed up to 19 km/h (12 mph).

Note (1) *Creep function not available in this gear or above.

Note (2) **Max speed dependent on model and configuration (standard vs. high speed transmission).

Note (3) ***Reverse is 30 km/h (19 mph).

Tires

Tire Size - Standard *405/70 R20 SPT9

Tire Size - Optional 405/70 R20 Powerloads

Tire Size - Optional (1) 400/70 R20 XMCL/Bibload

Tire Size - Optional (2) 360/80 R20 TRI 2

Tire Size - Optional (3) 40X14-20 TL, SM/TR

Note *This tire has been used for all dimension, stability and performance data.

Note (1) Other tire choices are available. Contact your Cat dealer for details.

Note (2) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Cab

ROPS ISO 3471:2008

FOPS ISO 3449:2005 Level II

Note (1) Canopy and cab, Rollover Protective Structures (ROPS) are available worldwide. Canopy not available in EU.

Loader Hydraulic System

Main Relief - 1st Auxiliary (3rd slice) 3408 psi 23500 kPa

Main Relief - 1st Auxiliary (3rd slice) - Standard Flow* 24 gal/min 90 l/min

Main Relief - 1st Auxiliary (3rd slice) - High Flow* 33 gal/min 125 l/min

Main Relief - 2nd Auxiliary (4th slice) 3408 psi 23500 kPa

Main Relief - 2nd Auxiliary (4th slice) - Flow 12 gal/min 45 l/min

Hydraulic Cycle Time - Rackback 2.5 s 2.5 s

Hydraulic Cycle Time - Lift 5.8 s 5.8 s

Hydraulic Cycle Time - Dump 1.8 s 1.8 s

Hydraulic Cycle Time - Float Down 3.6 s 3.6 s

Note * Maximum flow stated, actual flow delta could be 6% from data shown. Also adjustable from 20% to 100% of maximum flow through display.

Dimensions - With HPL-V Coupler - Approximate#

Height: Ground to Cab** 8.75 ft 2670 mm

Height: Ground to Beacon** 9.33 ft 2849 mm

Height: Ground Axle Center** 1.67 ft 519 mm

Height: Ground Clearance** 1 ft 320 mm

Length: Overall* 18.17 ft 5544 mm

Length: Rear Axle to Bumper 4.5 ft 1391 mm

Length: Hitch to Front Axle 3.5 ft 1085 mm

Length: Wheel Base 7.08 ft 2170 mm

Clearance: Bucket at 45° * 8.58 ft 2623 mm

Clearance: Load over Height** 9.75 ft 2960 mm

Clearance: Level Bucket** 10.5 ft 3206 mm

Height: Bucket Pin** 11.17 ft 3412 mm

Height: Overall** 14.17 ft 4313 mm

Reach: Bucket at 45° * 2.33 ft 706 mm

Carry Height: Bucket Pin 1.17 ft 367 mm

Dig Depth** 0.33 ft 109 mm

Width: Bucket 6.75 ft 2080 mm

Width: Tread Center 5.08 ft 1570 mm

Turning Radius: Over Bucket 14.75 ft 4493 mm

Width: Over Tires 6.67 ft 2021 mm

Turning Radius: Outside of Tires 13.17 ft 4005 mm

Turning Radius: Inside of Tires 6.5 ft 1981 mm

Rack Angle at Full Lift 53°

Dump Angle at Full Lift 45°

Rack Angle at Carry 51°

Departure Angle - Degrees 30°

Articulation Angle - Degrees 39°

Operating Weight: Bucket ^ 14633 lb 6637 kg

Tipping Load - Straight - ISO 14397-1 † 10626 lb 4820 kg

Tipping Load - Full Turn - ISO 14397-1 † 8895 lb 4035 kg

Operating Weight: Carriage and Tines ^^ 14252 lb 6467 kg

Tipping Load - Straight † 10626 lb 3297 kg

80% of Tip: Firm and Level EN474-3 †† 5815 lb 2638 kg

Note (1) *Vary with bucket

Note (2) **Vary with tire

Note (3) ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.

Note (4) ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).

Note (5) †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.

Note (6) ††Full compliance to EN474-3 and SAE J1197.

Note (7) #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.

Note (8) Dimensions listed are for a machine configured with standard cab, heater, 20 km/h (12 mph), standard guarding, 80 kg (176 lb) operator, full fluids, SPT9 405/70 R20 tires and 1.15 m3 (1.5 yd3) general purpose bucket with bolt-on cutting edge or a class III fork carriage and tines, (tire supplier variability can impact dimensions by 2%).

Note (9) Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9

Dimensions - With SSL Coupler - Approximate

Height - Ground to Cab 8.75 ft 2670 mm

Height: Ground to Beacon** 9.33 ft 2849 mm

Height: Ground Axle Center** 1.67 ft 519 mm

Height - Ground Clearance 1 ft 320 mm

Length - Overall with Bucket 18.67 ft 5707 mm

Length: Rear Axle to Bumper 4.5 ft 1391 mm

Length: Hitch to Front Axle 3.5 ft 1085 mm

Length - Wheel Base 7.08 ft 2170 mm

Clearance - Bucket at 45° 8.25 ft 2511 mm

Clearance: Load over Height** 9.75 ft 2960 mm

Clearance - Level Bucket 10.5 ft 3197 mm

Height - Bucket Pin 11.17 ft 3412 mm

Height: Overall** 14.42 ft 4403 mm

Reach - Bucket at 45° 2.67 ft 811 mm

Carry Height: Bucket Pin 1.25 ft 388 mm

Dig Depth 0.45 ft 117 mm

Width - Bucket 6.75 ft 2080 mm

Width - Tread Center 5.08 ft 1570 mm

Turning Radius - Over Bucket 15.08 ft 4607 mm

Width - Over Tires 6.67 ft 2021 mm

Turning Radius: Outside of Tires 13.17 ft 4005 mm

Turning Radius - Inside Tire 6.67 ft 2033 mm

Rack Angle at Full Lift 50°

Dump Angle at Full Lift 48°

Rack Angle at Carry 54°

Departure Angle - Degrees 30°

Articulation Angle - Degrees 39°

Operating Weight: Bucket ^ 14752 lb 6691 kg

Tipping Load – Straight – ISO 14397-1 † 9581 lb 4347 kg

Tipping Load – Full Turn – ISO 14397-1 † 8141 lb 3693 kg

Operating Weight: Carriage and Tines ^^ 14391 lb 6530 kg

Tipping Load - Straight † 9753 lb 4424 kg

80% of Tip: Firm and Level EN474-3 †† 5438 lb 2468 kg

Note (1) *Vary with bucket

Note (2) **Vary with tire

Note (3) ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.

Note (4) ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).

Note (5) †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.

Note (6) ††Full compliance to EN474-3 and SAE J1197.

Note (7) #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.

Note (9) Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9

Tipping Load - Full Turn - ISO 14397-1† 6800 lb 3085 kg

Length: Front Axle to Front of Coupler 4.75 ft 1436 mm

Dimensions - High Lift - With HPL-V Coupler - Approximate#

Height: Ground to Cab** 8.75 ft 2670 mm

Height: Ground to Beacon** 9.33 ft 2849 mm

Height: Ground Axle Center** 1.67 ft 519 mm

Height: Ground Clearance** 1 ft 320 mm

Length: Overall* 19.67 ft 6000 mm

Length: Rear Axle to Bumper 4.5 ft 1391 mm

Length: Hitch to Front Axle 3.5 ft 1085 mm

Length: Wheel Base 7.08 ft 2170 mm

Clearance: Bucket at 45° * 10.92 ft 3338 mm

Clearance: Load over Height** 10.75 ft 3282 mm

Clearance: Level Bucket** 12.08 ft 3693 mm

Height: Bucket Pin** 12.75 ft 3898 mm

Height: Overall** 15.67 ft 4769 mm

Reach: Bucket at 45° * 3.25 ft 990 mm

Carry Height: Bucket Pin 1.17 ft 367 mm

Dig Depth** 0.33 ft 109 mm

Width: Bucket 6.75 ft 2045 mm

Width: Tread Center 5.08 ft 1570 mm

Turning Radius: Over Bucket 15.83 ft 4825 mm

Width: Over Tires 6.67 ft 2021 mm

Turning Radius: Outside of Tires 13.17 ft 4005 mm

Turning Radius: Inside of Tires 6.5 ft 1981 mm

Rack Angle at Full Lift 69°

Dump Angle at Full Lift 40°

Rack Angle at Carry 48°

Departure Angle - Degrees 30°

Articulation Angle - Degrees 39°

Operating Weight: Bucket ^ 14848 lb 6735 kg

Tipping Load - Straight - ISO 14397-1 † 9187 lb 4167 kg

Tipping Load - Full Turn - ISO 14397-1 † 7645 lb 3468 kg

Operating Weight: Carriage and Tines ^^ 14542 lb 6596 kg

Tipping Load - Straight † 9187 lb 4167 kg

80% of Tip: Firm and Level EN474-3 †† 4706 lb 2135 kg

Note (1) *Vary with bucket

Note (2) **Vary with tire

Note (3) ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.

Note (4) ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).

Note (5) †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.

Note (6) ††Full compliance to EN474-3 and SAE J1197.

Note (7) #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.

Note (9) Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9

Dimensions - High Lift - With SSL Coupler - Approximate

Height: Ground to Cab** 8.75 ft 2670 mm

Height: Ground to Beacon** 9.33 ft 2849 mm

Height: Ground Axle Center** 1.67 ft 519 mm

Height: Ground Clearance** 1 ft 320 mm

Length: Overall* 20.17 ft 6157 mm

Length: Rear Axle to Bumper 4.5 ft 1391 mm

Length: Hitch to Front Axle 3.5 ft 1085 mm

Length: Wheel Base 7.08 ft 2170 mm

Clearance: Bucket at 45° * 10.42 ft 3181 mm

Clearance: Load over Height** 10.75 ft 3282 mm

Clearance: Level Bucket** 12.08 ft 3684 mm

Height: Bucket Pin** 12.75 ft 3898 mm

Height: Overall** 15.92 ft 4859 mm

Reach: Bucket at 45° * 3.42 ft 1048 mm

Carry Height: Bucket Pin 1.25 ft 388 mm

Dig Depth** 0.42 ft 117 mm

Width: Bucket 6.75 ft 2045 mm

Width: Tread Center 5.08 ft 1570 mm

Turning Radius: Over Bucket 16.17 ft 4919 mm

Width: Over Tires 6.67 ft 2021 mm

Turning Radius: Outside of Tires 13.17 ft 4005 mm

Turning Radius: Inside of Tires 6.5 ft 1981 mm

Rack Angle at Full Lift 66°

Dump Angle at Full Lift 40°

Rack Angle at Carry 42°

Departure Angle - Degrees 30°

Articulation Angle - Degrees 39°

Operating Weight: Bucket ^ 15070 lb 6836 kg

Tipping Load - Straight - ISO 14397-1 † 8385 lb 3803 kg

Tipping Load - Full Turn - ISO 14397-1 † 6943 lb 3149 kg

Operating Weight: Carriage and Tines ^^ 14714 lb 6674 kg

Tipping Load - Straight † 8385 lb 3803 kg

80% of Tip: Firm and Level EN474-3 †† 4375 lb 1984 kg

Note (1) *Vary with bucket

Note (2) **Vary with tire

Note (3) ^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), 1.15 m3 (1.5 yd3) general purpose bucket.

Note (4) ^^Horizontal Pin Lock Coupler (HPL-V) or Vertical Pin Coupler (SSL), class III carriage, 1220 mm (4 ft) tines (500 mm [20 in] load center).

Note (5) †Full compliance to ISO 14397-1 (2007) Sections 1 thru 6 (fork 500 mm [20 in] load center), which requires 2% verification between calculation and testing.

Note (6) ††Full compliance to EN474-3 and SAE J1197.

Note (7) #HPL-A weight, tipping and rated loads are within 1% of the HPL-V.

Note (9) Note: Goodyear POWERLOAD® tires can add up to approximately 140 kg (305 lb) to the full turn tip load and reduce vertical height by approximately 25 mm (1 in) compared to SPT9

Sustainability

Recyclability 93%

Resources for 908

CONFIGURED FOR SUCCESS

Cat® wheel loaders set the standard for productivity, fuel efficiency and operator comfort. The Cat 908 Compact Wheel Loader has ahigh torque C2.8 engine that works in conjunction with an intelligent hystat power train to deliver exceptional fuel efficiency. Dependent on regional requirements our engines meet U.S. EPA Tier 4 Final and EU Stage V emission standards with a clean emission module designed to manage itself so you can concentrate on the task at hand or emit equivalent to U.S. EPA Tier 3 and EU Stage IIIA.

ENJOY ALL DAY COMFORT

All new cab is spacious, quiet and comfortable with all around 360° visibility to keep you productive throughout the day. Seat-mounted controls feature a multifunction joystick for lift and tilt functions with an integrated thumb operated speed range, forward/neutral/reverse (FNR) switch, trigger operated differential lock and constant flow. Optional fourth function joystick also available.
Digital display with soft touch buttons for customized settings to easily control linkage and drive train to further enhance operator comfort and safety.

EFFICIENTLY POWERFUL

Cat C2.8 engine provides a cleaner, quieter operation while delivering superior performance and durability through a high torque, low speed design. Caterpillar’s exclusive Intelligent Power Management system monitors operator input and available power to keep the machine working at peak efficiency.
“Shift on the go” locking differentials and hydrostatic transmission provide smooth and powerful operation while increasing the efficiency of machine cycles. New Powertrain (Utility) Mode via the display enables right pedal machine operation giving further improved operator controllability of attachment RPM versus machine ground speed over creep control and inching pedal.

WORK MADE EASY

All-in-one joystick to keep eyes on the work while maximizing operation of hydro-mechanical attachments with a state of the art pressure compensated electro-hydraulic system. Optimized Z-bar linkage for great performance and versatility with buckets that now have the DNA of the larger Cat loaders, such as curved side plates and a flat torque tube for parallel reference to the cutting edge.

CUSTOMIZE YOUR EXPERIENCE

Work as one with your machine by customizing the controls. Operator can adjust machine responsiveness with the push of a button based on the attachment or application. Once customized, settings can be locked with “simplified mode” to ensure the machine is consistent and intuitive for every user.
Machine security is enhanced with a standard keycode or optional Bluetooth® technology.

PURPOSE BUILT SPECIALTY MODELS

Machines can be built to meet industry and application specific needs: Agriculture, General Construction, Industrial and Waste, Landscaping or Snow Removal.
The 908 is availble with the following specific handler arrangements: Ag Handler and Waste Handler

AFTERMARKET AND SERVICES

Range of services and aftermarket retrofits and upgrades available to keep your machine going and configured for your application.
Service and maintenance parts available, including a range of self-service options (SSO) and dealer installed kits.
Integrated Technology available to reduce service costs and maintenance.

SUSTAINABILITY

The Cat® C2.8 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
Advanced Electro Hydraulic System provides the optimum balance of power and efficiency while giving you the control you need for your precise jobsite requirements.
Engine Demand Fan is hydraulically driven to provide machine cooling only when needed, improving fuel efficiency and reducing greenhouse gas emissions.
Hydrostatic Transmission is an efficient way to transfer engine power to the wheels at low speeds versus a torque converter.
Efficient HVAC regulates temperature control. No need to leave the machine running to cool the cab.
Shift on the go transmission, means no need to stop so you keep your momentum.

908 Standard Equipment

POWER TRAIN

Emissions compliant, two options (Dependent on regional regulations.)
– U.S. EPA Tier 4 Final and EU Stage V
– U.S. EPA Tier 3 and EU Stage IIIA equivalent

Cat C2.8 engine
– Diesel particulate filter (Fit for Life) or muffler (Dependent on regional regulations.)
– Fuel, diesel, ultra low or low Sulphur (Dependent on regional regulations.)
– Hydrostatic transmission, two speed, with inching function, “shift on the go”
– Power train mode, hystat

Air cleaner, two stage filter, with in cab audio/visual indicator on display

Axles, heavy duty, frame mounted with outboard planetary reduction

Closed circuit breather

Coolant, extended life, –36° C (–33° F)

Drive shaft, sealed for life, universal joints

Engine, auto idle shutdown, hibernation mode

Engine oil, ECO drain tap and hose

Fuel pump, priming (manual)/water separator/drain

HYDRAULICS

Hydraulic pilot shut off switch, in cab

Electro-hydraulic, fully proportional controls

Dead engine lower, lift valve, manual

Demand cooling fan, hydraulically drive

Coupler/pin on attachment ready

Caterpillar HYDO™ Advanced 10 hydraulic oil

Hystat displacement pump, infinitely variable

Implement valve, pressure compensated

Joystick, single lever, single auxiliary roller

Multi-function lift and tilt with loader arm float

Motor, single drive with dedicated implement and steering pumps

ELECTRICAL

Alternator, 100 amp sealed

Battery, heavy duty, 12V, 90Ah and 1,000 CCA

Battery disconnect switch

Cab mounted fuse panel

Lights, rear stop and turn, LED

Lights, roading, front halogen

Service (Electronic Technician™)

Product Link™

OPERATOR ENVIRONMENT

ROPS/FOPS certified canopy/cab
– 12V power outlets, interior/exterior
– Pedals, raised, foot, brake/inching, accelerator
– Lever, parking brake
– Cup holders (2)
– CB radio clip, phone holder
– Door release, internal (left and right)
– Hook, large, coat and hard hat
– Floormat, heavy duty, easy clean
– Mirrors, (2) external breakaway, (1) internal
– Operator station on isolation mounts
– Steering wheel, spinner knob, horn in center
– Seat belt, orange, retractable, 51 mm (2 in)
– Storage, personal (trays [3], seat pocket)
– Steering column, tilt adjusted
– Column mounted multi function control: lights, roading, wipers, self cancelling turn signals
– Quick coupler switch, in cab

Display, analog and digital
– Gauges (2), hydraulic oil, engine coolant
– Digital with soft touch buttons – fuel level, speed range, speedometer, service hour meter, service/maintenance information, hydraulic and power train performance and aggressiveness settings, security passcode (multiple languages)

Joystick, seat mounted, standard multifunction
– FNR, auxiliary roller, speed range select, continuous flow, differential lock, horn
– Arm rest, padded right, multiple position vertical height

Seat, manual height adjustment, (cab) fabric with adjustable left arm rest, (canopy) vinyl

Cab
– Doors (2), fixed glass
– Wipers, front and rear, full front coverage
– Windshield, front single piece
– Window, rear heated
– Radio ready, speakers and wiring
– Air vents, (4) screen, (7) directional
– Heating, mechanical control unit
– Sun visor, solid, front full width
– Interior light (incandescent)

OTHER

Fenders, front and rear

Ground level easy access daily service points

Loader arm safety brace

Lockable main and side engine enclosures

Lockable, fuel cap, HVAC filters, nose cone

Machine lifting/tie down points

Paint, Electro-Coat primer, gloss topcoat

Recovery hitch with pin

Scheduled Oil Sampling (S·O·S℠) ports, engine oil and hydraulic oil

908 Optional Equipment

POWER TRAIN

Antifreeze, extended life coolant, –50° C (–58° F)

Cold start – jacket water heater, bypass valve

Creep and throttle lock function

Fuel pump, priming, electric (Dependent on regional regulations.)

40 km/h (25 mph) hydrostatic transmission, 3-speed, “shift on the go”, secondary steering and boosted brakes

Power train mode, utility (includes keypad)

ELECTRICAL

Lighting packages, multiple; front, rear, engine bay (LED or HAL)

Push to start

Work tool wiring harness, (3) in cab switches

HYDRAULICS

Auxiliary flow, single standard (3) valve, single high flow (3) valve, dual high flow (4) valve

Caterpillar Bio HYDO Advanced hydraulic oil

Connect under pressure and case drain

Ride Control or load check valves*

Reversing fan

Quick disconnect auxiliary hydraulics

OPERATOR STATION

Air Conditioning, automatic temperature control (ATC)

Doors, sliding windows (left and right)

Interior light, door activated

Joystick, FNR, twin auxiliary roller, differential lock, horn

Joystick, seat mounted, multifunction

Mirrors (2) electronically adjustable, heated external, plus lower parabolic mirror

Phone holder, spring loaded

Radio, FM or digital audio broadcast

Seat belt options, multiple

Seat packages; deluxe or premium

Secondary display, front or rear view camera

Soft touch keypad options, 8 or 16 button

Storage, lockable box or lockable cooled box

Sun visor, rear perforated

USB ports (2), interior

OTHER

Couplers, vertical (SSL), horizontal (HPL-V, HPL-A)

Rotary sensors (snubbing, kickouts, parallel)

High lift option

thank you for sharing your thoughts!

908 Compact Wheel Loaders

Enquire Now

Inquire Now

Thank You!

Oops!